N.B. these items can not be shipped express
{{ (product.stock.available ? ' In stock' : ' Out of stock') | t }}{{ product.stock.delivery ? (', '+product.stock.delivery.title | lower) : '' }}
Spray.bike products can't be shipped via Express Post, but we can send up to 10 cans at a time through the Parcel Post system.
{{ 'Leave your e-mail address so we can send you an e-mail when this product is back in stock.' | t }}

Instructions for use

  • Ensure surface is clean and dry
  • Wear protective gloves, protective clothing, eye/face protection
  • Always paint in an open space in the open air
  • Shake can for at least 3 minutes before use
  • Test spray for 2-3 seconds prior to application
  • Optimal temperature for spraying: 20-25°C. Do not use Spray.Bike if the temperature is below 10°C or above 35°C, or if relative humidity is above 75%
  • Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
  • Solid colours: spray surface from a distance of 5-12 cm
  • Pocket Clears, Frame Builder’s Smoothing Putty, Frame Builder’s Transparent Finish, Frame Builder’s Cold-Zinc, Frame Builder’s Metal Primer, Frame Builder’s Carbon Primer,  Frame Builder’s Metal Plating: spray surface from a distance of at least 20 cm
  • Keirin Flake: spray surface from a distance of at least 30 cm
  • Frame Builder’s Top Wax: Spray onto a paper towel or soft lint-free cloth and apply gently
  • When spraying, keep hand moving at all times
  • Allow to dry before adding 2nd coat (touch dry: 10 minutes, complete cure: 2 hours)
  • At end, turn can upside down and spray for 2 seconds before storing
  • Protect can from sunlight and temperatures exceeding 50°C/122°F
  • For a satin or gloss top-coat, finish with Spray.Bike Frame Builder's Transparent Finish - Satin/Gloss. For a matte top-coat, finish with the Frame Builder's Transparent Finish - Matte
  • For ongoing protection (whether the finish is matte, satin or gloss), regularly apply the Frame Builder's Top Wax