N.B. these items can not be shipped express
{{ 'Leave your e-mail address so we can send you an e-mail when this product is back in stock.' | t }}
Instructions for use
- Ensure surface is clean and dry
- Wear protective gloves, protective clothing, eye/face protection
- Always paint in an open space in the open air
- Shake can for at least 3 minutes before use
- Test spray for 2-3 seconds prior to application
- Optimal temperature for spraying: 20-25°C. Do not use Spray.Bike if the temperature is below 10°C or above 35°C, or if relative humidity is above 75%
- Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
- Solid colours: spray surface from a distance of 5-12 cm
- Pocket Clears, Frame Builder’s Smoothing Putty, Frame Builder’s Transparent Finish, Frame Builder’s Cold-Zinc, Frame Builder’s Metal Primer, Frame Builder’s Carbon Primer, Frame Builder’s Metal Plating: spray surface from a distance of at least 20 cm
- Keirin Flake: spray surface from a distance of at least 30 cm
- Frame Builder’s Top Wax: Spray onto a paper towel or soft lint-free cloth and apply gently
- When spraying, keep hand moving at all times
- Allow to dry before adding 2nd coat (touch dry: 10 minutes, complete cure: 2 hours)
- At end, turn can upside down and spray for 2 seconds before storing
- Protect can from sunlight and temperatures exceeding 50°C/122°F
- For a satin or gloss top-coat, finish with Spray.Bike Frame Builder's Transparent Finish - Satin/Gloss. For a matte top-coat, finish with the Frame Builder's Transparent Finish - Matte
- For ongoing protection (whether the finish is matte, satin or gloss), regularly apply the Frame Builder's Top Wax